Hastelloy G30 Dealers, Suppliers, Stockists, Manufacturers In India.

Nova Steel Corporation is one of the leading Hastelloy G30 Manufacturer, Suppliers, and Dealers in India. Hastelloy G30 is vital to the aerospace industry and important in transportation and structures, such as building facades and window frames. Hastelloy G30 is being manufactured by using the finest grade of raw materials and cutting-edge techniques as per customer’s requirements and is accessible to our valuable customers in a different range of diameters, wall thicknesses, and sizes at quite affordable rates.

Hastelloy G-30 Chemical Composition:

The Chemical Composition of Hastelloy G30, %
Ni	Balance
Co	≤5.0
Cr	28.0-31.5
Mo	4.0-6.0
W	1.5-4.0
Fe	13.0-17.0
Si	≤0.8
Mn	≤1.5
C	≤0.03
Cb+Ta	0.3-1.5
Cu	1.0-2.4
P	≤0.04
S	≤0.02

Get In Touch

Hastelloy G-30 Physical Properties:

Density		Electrical Resistivity		Thermal Conductivity		Melting Point
lb/in³	g/cm³	µohm. in	µohm.m	BTU.in/h.ft².°F	W/m.°C	°C	°F
0.297	8.22	45.7	1.16	69	10	1371	2500

Product Forms and Standards of Hastelloy G-30

Product Form	Standard
Sheet, Plate & Strip	ASTM B582
Billet, Rod & Bar	ASTM B581, B472
Seamless Pipe & Tube	ASTM B622
Welded Pipe & Tube	ASTM B619, B626
Fittings	ASTM B366, B462
Forgings	ASTM B462

Dimensions of Hastelloy G-30

Surface finish	Thickness (mm)	Width (mm)
2B – Cold rolled, heat-treated, pickled, skin passed	0.25–8.0	max. 2032
2D – Cold rolled, heat-treated, pickled	0.4–6.35	max. 1524
2E – Cold rolled, heat-treated, mechanically descaled	0.4–8.0	max. 2032
2R – Cold rolled, bright annealed	0.25–3.5	max. 1524
2H – Work hardened	0.4–6.35	max. 1524
Polished, brushed	0.5–4.0	max. 1524

Hastelloy G-30 Sizes & Specifications

Sizes	1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness	0.1mm to 100 mm Thk
Width	10-2500mm
Length	2m, 2.44m, 3m, or as required
ASTM	ASTM B168
Finish	Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness	Soft, Hard, Half Hard, Quarter Hard, Spring Hard, etc.
Stock in the form of	Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate
Material	JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc DIN: H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc
ASTM Standard	ASTM A162, GB/T2054, DIN177502002, ASTM B127,ASTM B435, ASTM B582, ASTM B575, ASTM B168, ASTM B443, ASTM B463, ASTM B626, ASTM B536, etc
Why choose Superior Steel Overseas	EN 10204/3.1B, Raw Materials Certificate 100% Radiography Test Report Third-Party Inspection Report, etc High special strength, high melt point Excellent corrosive resistance, good thermal resistance Customer support after-sales service Huge Stock, Timely delivery Strict Control from Raw Material to Finished Inconel 600 Plate Free Quote, Inquiry answered within 24 hours
Inconel 600 profiling	To provide a full profiling service we use numerous profiling methods including: Laser Plate Cutting Plasma Plate Cutting Oxy-propane Flame Cutting

Size	15 NB to 150 NB IN
Type	Seamless / ERW / Welded / Fabricated / Hollow / LSAW Pipes
wall thickness	035″ –.095′, (special wall thicknesses available)
Schedule	SCH5, SCH10, SCH40, STD, SCH80, SCH160
Finish	Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF
Form	Round, Square, Rectangular, Hydraulic, Straight or ‘U’ bent Tubes Etc
Length	Single Random, Double Random & Cut Length.
End	Plain End, Beveled End, Threaded.
Surface Finish	1/2 inch through 1″ tubing is mechanically polished with an inner diameter (ID) of 20 Ra µ-inch (0.5 µm) Outer diameter (OD) of 32 µ-inch (0.8 µm). 1-1/2 and 2-inch Alloy G30/ G35 tubing is available with a sanitary finish that is better than traditional commercial-grade tube finish, and suitable for applications in sanitary/ high purity hygienic industries. 3-inch Alloy G30/ G35 tubing is available with a mill finish ID and OD.
Marking	All s are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.)
We can also cut, thread, and groove Hastelloy G30/ G35 Tubes to meet your specifications.

Hastelloy G30 Uses & Applications

Hastelloy G30 are widely used all over the world in different industries. Here are the top uses of Hastelloy C2000 –

Transporting materials: such as hot water, chemicals, oil, gas, and sulfur in various industries.
Automotive industry: air and water flow systems, and piping systems.
Sewerage systems: industrial water lines and water mains. Heating, ventilating and air-conditioning equipment.
Construction industries: structural applications and scaffolding.
Homes and buildings: supply and exhaust piping, water pipes and curtain rods.

About Hastelloy G30

Hastelloy HR 120 surface roughness. AISI 301 Sheets are nonmagnetic and do not easily ignite. The Hastelloy G30 is an alloy that is often noted for its use in the aerospace industry. Due to its excellent properties, the Hastelloy G30 is used in applications that have requirements for superior mechanical properties such as high tensile strength as well as hardness.

Hastelloy Grades

ADDITIONAL INFORMATION OF Hastelloy G30:

Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer), Other
Port of Dispatch: Mumbai OR KALAMBOLI India
Packaging Details: are given marking, painted with black japan or black Board (Mat Finish) & will be packed in a bagging bag with stickers written with size, grade & quantity.

Manufacturer Supplier of Hastelloy G30 in India:

We, Nova Steel Corporation are Manufacturers of Hastelloy G30 in Mumbai, India. Our high-quality range of Hastelloy G30 is exclusively designed for chemical industries, steel factories, petrochemical industry, fire protection systems, shipping/shipment industries, etc. Hastelloy G30are made with precision using the best quality raw material. We also customize Hastelloy G30 as per the customer’s requirements.

Manufacturers Suppliers of Hastelloy G30:
Bengaluru	Mumbai	Chennai	Hyderabad	Kolkata	Pune
New Delhi	Ahmedabad	Jaipur	Surat	Salem	Gandhinagar
Bhiwandi	Tiruppur	Sivakasi	Jamnagar	Thiruvananthapuram	Rajahmundry
Bhubaneswar	Vijaywada	Firozabad	Bokaro Steel City	Rajkot	Bharuch
Panna	Raipur	Cochin	Ludhiana	Panipat	Durgapur
Peenya	Pimpri-Chinchwad	Channapatna	Kharagpur	Nashik	Bareilly
Varanasi	Haldia	Rourkela	Bangalore	Moradabad	Indore
Visakhapatnam	Trivandrum	Pithampur	Dibrugarh	Angul	Gwalior
Coimbatore	Kannur	Nagpur	Vadodara	Rudrapur	Noida
Agra	Bhagalpur	Jamshedpur	Bhilai	Lucknow	kanpur
Thane	Bhopal

Manufacturer Exporter of Hastelloy G30in International Markets:

Nova Steel India are Exporters of Hastelloy G30 in Saudi Arabia, Australia, Sri Lanka, Oman, Kuwait, Brazil, South Africa, United States, Venezuela, Singapore, United Kingdom, UAE, Qatar, Iran, Canada, Mexico, Nigeria, Malaysia, Turkey, and more than 80+ countries. We, Nova Steel India is one of the best Manufacturer Exporters of Hastelloy G30.

Manufacturer Exporter of Hastelloy G30:
Saudi Arabia	Oman	Kuwait	Netherlands	Iran
Bahrain	Qatar	UAE	Africa	China
Nigeria	Mexico	Canada	Venezuela	United Kingdom
United States	South Africa	Malaysia	Bangladesh	Turkey
Singapore	Sri Lanka	Australia	Brazil