AISI 303 Stainless Steel Plates Manufacturer, Supplier, and Dealer in India

Nova Steel Corporation is one of the leading AISI 303 Plates Manufacturer, Supplier, and Dealer in India. AISI 303 Plates are vital to the aerospace industry and important in transportation and structures, such as building facades and window frames. AISI 303 Plates are being manufactured by using the finest grade of raw materials and cutting-edge techniques as per customer’s requirements, and are accessible to our valuable customers in a different range of diameters, wall thicknesses, and sizes at quite affordable rates.

AISI 303 Stainless Steel Round Bar Chemical Composition

Chemical Composition, %
ASTM	AISI (UNS)	C, ≤	Si, ≤	Mn, ≤	P, ≤	S, ≥	Cr	Ni	Notes
ASTM A582/A582M	303 (UNS S30300)	0.15	1.00	2.00	0.20	0.15	17.0-19.0	8.0-10.0	Free-Machining Stainless Steel Bars
ASTM A581/A581M									Free-Machining Stainless Steel Wire and Wire Rods
ASTM A895									Free-Machining Plate, Sheet, and Strip
ASTM A959									Wrought Stainless Steels
ASTM A473									Stainless Steel Forgings
ASTM A314									Billets and bars for forging

AISI 303 Stainless Steel Round Bar Mechanical Properties

AISI 303 Mechanical Properties
ASTM	AISI	Conditions	Tensile Strength, MPa (ksi), ≥	0.2% Yield Strength, MPa (ksi), ≥	Elongation in 50 mm (2 in.), %, ≥	Reduction of Area, %, ≥
ASTM A473	303 (UNS S30300)	Annealed	515 (75)	205 (30)	40	50
ASTM A581/A581M		Annealed	585-860 (85-125)
ASTM A581/A581M		Cold Worked	795-1000 (115-145)

AISI 303 Stainless Steel Round Bar Machinability

Increased tool life attained with coated cutting tools

Cutting tool		Coating	Workpiece material	Workpieces machined before resharpening
Type	High-speed tool steel, AISI type	Coating	Workpiece material	Uncoated	Coated
Broach insert	M3	TiN	Type 303 stainless steel	100,000	300,000
Form tool	T15	TiN	Type 303 stainless steel	1,840	5,890

Recommended face angles, along with backoff angles for type 303 stainless steel:

Face angle, 15 degrees;
Backoff angle:0.5 – 2 degrees.

Speed and feed ranges for the spade drilling are listed in the following table.

Material drilled	Drill diameter, mm (in.)
	25 (1)		50 (2)		75 (3)		100 (4)		125 (5)
	Speed, rev/min	Feed rate, mm/rev (in./rev)	Speed, rev/min	Feed rate, mm/rev (in./rev)	Speed, rev/min	Feed rate, mm/rev (in./rev)	Speed, rev/min	Feed rate, mm/rev (in./rev)	Speed, rev/min	Feed rate, mm/rev (in./rev)
Type 303 and 303 Se	225-275	0.15-0.25 (0.006-0.010)	120-125	0.25-0.38 (0.010-0.015)	75-90	0.38-0.51 (0.015-0.020)	55-65	0.51-0.63 (0.020-0.025)	45-55	0.63-0.76 (0.025-0.030)

Recommended cutting parameters for indexable drills with uncoated and titanium-coated carbide inserts

Material	Drill size		Speed				Feed		Insert style	Grade
			Standard length		Stub length
	mm	in.	m/min	sfm	m/min	sfm	mm/rev	in./rev
AISI 303, 304 and 316, 416	19-30	.75 – 1.1875	45-105	150-350	45-150	150-500	0.08-0.10	0.003-0.004	SPGM	C-2, Uncoated
	32-36.5	1.25-1.4375					0.10-0.13	0.004-0.005	SNMG	C-5, Titanium coated.
	38-47.5	1.50-1.875					0.10-0.15	0.004-0.006	SNMMND
	49-75	1.9375-3					0.13-0.20	0.005-0.008	SNMMND

Nominal speeds and feeds for thread milling with high-speed steel tools

Work material	Hardness, HB	Speed		Feed
Work material	Hardness, HB	m/min	sfm	mm/tooth	in./tooth
Type 303	135-185	30	100	0.05	0.002
Type 303	225-275	27	90	0.04	0.0015

Nominal speeds for die-cutting of screw threads

Work metal	Speed for the pitch of
	≤ 7		8-15		16-24		≥ 25
	m/min	sfm	m/min	sfm	m/min	sfm	m/min	sfm
Types 303, 410, 420F, 440F	3	10	4.5	15	6	20	7.5	25

Nominal speed, cutting rate, and band life for the cutoff band sawing of steel bars

Steel being cut	Hardness, HB	Band speed		Cutting rates		Band life in terms of total area cut
		m/min	sfm	mm2 x 10³/min	in.2/min	mm2 × 10⁶	in.2 × 10³
SS 303, 303F	150-200	40-27	130-90	3.2-1.3

Get In Touch

AISI 303 Plates Uses & Applications

AISI 303 Plates are widely used all over the world in different industries. Here are the top uses of AISI 316 Round Bars-

Transporting materials: such as hot water, chemicals, oil, gas, and sulfur in various industries.
Automotive industry: air and water flow systems, and piping systems.
Sewerage systems: industrial water lines and water mains. Heating, ventilating, and air-conditioning equipment.
Construction industries: structural applications and scaffolding.
Homes and buildings: supply and exhaust piping, water pipes, and curtain rods.

About Stainless Steel AISI 303 Plates

AISI 303 Plates surface roughness. Aluminum15-5-PH Round Bars are nonmagnetic and do not easily ignite. The AISI 303 Plates is an alloy that is often noted for its use in the aerospace industry. Due to its excellent properties, the AISI 303 Plates are used in applications that have requirements for superior mechanical properties such as high tensile strength as well as hardness.

Stainless Steel Grades

ADDITIONAL INFORMATION OF ALUMINIUM AISI 303 Plates:

Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer), Other
Port of Dispatch: Mumbai OR KALAMBOLI India
Packaging Details:AISI 303 Plates are given marking, painted with black japan or black Board (Mat Finish) & will be packed in a bagging bag with stickers written with size, grade & quantity.

Manufacturer Supplier of AISI 303 Plates in India:

We, Nova Steel Corporation are Manufacturers of AISI 303 Plates in Mumbai, India. Our high-quality range of AISI 303 Plates is exclusively designed for chemical industries, steel factories, petrochemical industry, fire protection systems, shipping/shipment industries, etc. AISI 316 Round Bars are made with precision using the best quality raw material. We also customize AISI 303 Plates as per the customer’s requirements.

Manufacturers Suppliers of AISI 303 Plates:
Bengaluru	Mumbai	Chennai	Hyderabad	Kolkata	Pune
New Delhi	Ahmedabad	Jaipur	Surat	Salem	Gandhinagar
Bhiwandi	Tiruppur	Sivakasi	Jamnagar	Thiruvananthapuram	Rajahmundry
Bhubaneswar	Vijaywada	Firozabad	Bokaro Steel City	Rajkot	Bharuch
Panna	Raipur	Cochin	Ludhiana	Panipat	Durgapur
Peenya	Pimpri-Chinchwad	Channapatna	Kharagpur	Nashik	Bareilly
Varanasi	Haldia	Rourkela	Bangalore	Moradabad	Indore
Visakhapatnam	Trivandrum	Pithampur	Dibrugarh	Angul	Gwalior
Coimbatore	Kannur	Nagpur	Vadodara	Rudrapur	Noida
Agra	Bhagalpur	Jamshedpur	Bhilai	Lucknow	kanpur
Thane	Bhopal

Manufacturer Exporter of AISI 303 Plates in International Markets:

Nova Steel India are Exporters of AISI 303 Plates in Saudi Arabia, Australia, Sri Lanka, Oman, Kuwait, Brazil, South Africa, United States, Venezuela, Singapore, United Kingdom, UAE, Qatar, Iran, Canada, Mexico, Nigeria, Malaysia, Turkey, and more than 80+ countries. We, Nova Steel India is one of the best Manufacturer Exporters of AISI 303 Plates.

Manufacturer Exporter of AISI 303 Plates:
Saudi Arabia	Oman	Kuwait	Netherlands	Iran
Bahrain	Qatar	UAE	Africa	China
Nigeria	Mexico	Canada	Venezuela	United Kingdom
United States	South Africa	Malaysia	Bangladesh	Turkey
Singapore	Sri Lanka	Australia	Brazil