Table of Contents
Aluminium 6061 T4 Coils Manufacturer, Supplier & Dealer in Mumbai, India.
Nova Steel Corporation is one of the leading 6061 T4 Sheets & Coils Manufacturer, Supplier and Dealer in India. 6061 T4 Sheets & Coils are being manufactured by using the finest grade of raw materials and cutting-edge techniques as per customer’s requirements, and are accessible to our valuable customers in a different range of diameters, wall thicknesses, and sizes at quite affordable rates. All 6061 T4 Sheets & Coils are designed and developed in accordance with IQS (International Quality Standards).
Aluminium 6061 T4 Sheets & Coils Size & Specifications |
||
| Specifications | : | ASTM / ASME SB209 |
| Size | : | 1000 mm x 60610 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 60610 mm x 60610 mm, 60610 mm x 4000 mm |
| Thickness | : | 0.1mm to 12 mm Thk |
| Form | : | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange) |
| Finish | : | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Hardness | : | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
Get In Touch
Chemical Composition of 6061 T4 Sheets & Coils
| Silicon | 0.4-0.8 |
| Iron | 2.2-2.8 |
| Copper | 0.15-0.40 |
| Manganese | 0.1 |
| Magnesium | 0.45 |
| Chromium | 0.04-.35 |
| Zinc | 0.1 |
| Titanium | 0.15 |
| Others, each | 0.05 |
| Others, total | 0.15 |
| Balance, Aluminum | |
Mechanical Properties Of 6061 T4 Sheets & Coils
| Temper | Tensile Strength | Yield Strength | Elongation |
|---|---|---|---|
| KSI | KSI | % | |
| O (annealed) | 22 | 12 | 10-16 |
| T4 | 30 | 16 | 10-16 |
| T6 | 42 | 35 | 4-10 |
Physical Properties Of 6061 T4 Sheets & Coils
| 6061 T6 | Value |
|---|---|
| Mn | 0.15 |
| Si | 0.4-0.8 |
| Cr | 0.15-0.35 |
| Cu | 0.15-0.4 |
| Fe | 0.7 |
| Zn | 0.25 |
| Mg | 0.8-1.2 |
| Ti | 0.15 |
| Al | Balance |
| Other Each/Total | 0.005/0.15 |
Thickness Chart of 6061 T4 Sheets & Coils
| Thickness (T) in millimetre | Width (W) in millimetre | Length(L) in millimetre |
| 0.51 | 1220 | 3660 |
| 0.81 | 1220 | 3660 |
| 0.91 | 1220 | 3660 |
| 1.02 | 1220 | 3660 |
| 1.27 | 1220 | 3660 |
| 1.60 | 1220 | 3660 |
| 2.03 | 1220 | 3660 |
| 2.29 | 1220 | 3660 |
| 2.54 | 1220 | 3660 |
| 3.00 | 1220 | 3660 |
| 3.18 | 1220 | 3660 |
| 4.06 | 1220 | 3660 |
| 4.76 | 1220 | 3660 |
| 5.00 | 1525 | 2440 / 3660 |
| 6.00 | 1220 / 1525 | 2440 / 3660 |
| 6.35 | 1220 / 1525 | 2440 / 3660 |
| 8.00 | 1220 / 1525 | 2440 / 3660 |
| 9.00 | 1220 / 1525 | 2440 / 3660 |
| 9.53 | 1220 / 1525 | 2440 / 3660 |
| 10.00 | 1220 / 1525 | 2440 / 3660 |
| 12.00 | 1220 / 1525 | 2440 / 3660 |
| 12.70 | 1220 / 1525 | 2440 / 3660 |
| 15.00 | 1220 / 1525 | 2440 / 3660 |
| 16.00 | 1220 / 1525 | 2440 / 3660 |
| 19.05 | 1220 / 1525 | 2440 / 3660 |
| 20.00 | 1220 / 1525 | 2440 / 3660 |
| 22.23 | 1220 / 1525 | 2440 / 3660 |
| 25.40 | 1220 / 1525 | 2440 / 3660 |
| 28.58 | 1220 / 1525 | 2440 / 3660 |
| 30.00 | 1220 / 1525 | 2440 / 3660 |
| 31.75 | 1220 / 1525 | 2440 / 3660 |
| 35.00 | 1220 / 1525 | 2440 / 3660 |
| 38.10 | 1220 / 1525 | 2440 / 3660 |
| 44.45 | 1220 / 1525 | 2440 / 3660 |
| 50.80 | 1220 / 1525 | 2440 / 3660 |
| 57.15 | 1220 / 1525 | 2440 / 3660 |
| 63.5 | 1220 / 1525 | 2440 / 3660 |
| 70.0 | 1220 / 1525 | 2440 / 3660 |
| 76.2 | 1220 / 1525 | 2440 / 3660 |
| 88.9 | 1220 / 1525 | 2440 / 3660 |
| 101.4 | 1220 / 1525 | 2440 / 3660 |
| 114.3 | 1220 / 1525 | 2440 / 3660 |
| 127.0 | 1220 / 1525 | 2440 / 3660 |
| 139.7 | 1220 / 1525 | 2440 / 3660 |
| 152.4 | 1220 / 1525 | 2440 / 3660 |
| 177.8 | 1220 / 1525 | 2440 / 3660 |
| 203.2 | 1220 / 1525 | 2440 / 3660 |
| 228.6 | 1220 / 1525 | 2440 / 3660 |
| 254.0 | 1220 / 1525 | 2440 / 3660 |
Sizes And Schedules of 6061 T4 Sheets & Coils
| Sizes Chart | Thickness in inch | Size in inch |
|---|---|---|
| 6061-T6-020 inch -4-X-2 | 0.020″ | 4′ x 2′ |
| 6061-T6-020 inch -4-X-4 | 0.020″ | 4′ x 4′ |
| 6061-T6-020 inch -6-X-4 | 0.020″ | 6′ x 4′ |
| 6061-T6-025 inch-4-X-2 | 0.025″ | 4′ x 2′ |
| 6061-T6-025 inch-4-X-4 | 0.025″ | 4′ x 4′ |
| 6061-T6-025 inch-6-X-4 | 0.025″ | 6′ x 4′ |
| 6061-T6-032 inch-4-X-2 | 0.032″ | 4′ x 2′ |
| 6061-T6-032 inch-4-X-4 | 0.032″ | 4′ x 4′ |
| 6061-T6-032 inch-6-X-4 | 0.032″ | 6′ x 4′ |
| 6061-T6-040 inch-4-X-2 | 0.040″ | 4′ x 2′ |
| 6061-T6-040 inch-4-X-4 | 0.040″ | 4′ x 4′ |
| 6061-T6-040 inch-6-X-4 | 0.040″ | 6′ x 4′ |
| 6061-T6-050 inch-4-X-2 | 0.050″ | 4′ x 2′ |
| 6061-T6-050 inch-4-X-4 | 0.050″ | 4′ x 4′ |
| 6061-T6-050 inch-6-X-4 | 0.050″ | 6′ x 4′ |
| 6061-T6-063 inch-4-X-2 | 0.063″ | 4′ x 2′ |
| 6061-T6-063 inch-4-X-4 | 0.063″ | 4′ x 4′ |
| 6061-T6-063 inch-6-X-4 | 0.063″ | 6′ x 4′ |
| 6061-T6-090 inch-4-X-2 | 0.090″ | 4′ x 2′ |
| 6061-T6-090 inch-4-X-4 | 0.090″ | 4′ x 4′ |
| 6061-T6-090 inch-6-X-4 | 0.090″ | 6′ x 4′ |
| 6061-T6-125 inch-4-X-2 | 0.125″ | 4′ x 2′ |
| 6061-T6-125 inch-4-X-4 | 0.125″ | 4′ x 4′ |
| 6061-T6-125 inch-6-X-4 | 0.125″ | 6′ x 4′ |
Dimensions Standard of 6061 T4 Sheets & Coils
| Aluminium 6061 T6 sheet/ Plate Surface finish Chart | Gauge (inch) | Width (max inch) |
|---|---|---|
| 2B – Cold rolled, pickled, heat-treated, skin passed Plate | 10–24 | 72* |
| 2D – Cold rolled, pickled plate, heat treated | 12–24 | 60 |
| BA Mexinox only | 18–28 | 48 |
| Polished plate/ sheet (not brushed) | 11–24 | 60 |
| Temper hot rolled plate Mexinox only | 13–29 | 48 |
Equivalent Grades of 6061 T4 Sheets & Coils
| Grade | WERKSTOFF NR. | UNS | DIN | EN | ISO |
| 6061 T6 | 3.3211 | A96061 | AlMgSiCu | AW-AlMg1SiCu, EN AW-6061 | AlMg1SiCu |
6061 T4 Sheets & Coils Uses & Applications
6061 T4 Sheets & Coils are widely used all over the world in different industries. Here are the top uses of 6061 T4 Sheets & Coils-
- Transporting materials: such as hot water, chemicals, oil, gas, and sulfur in various industries.
- Automotive industry: air and water flow systems, and piping systems.
- Sewerage systems: industrial water lines and water mains. Heating, ventilating and air-conditioning equipment.
- Construction industries: structural applications and scaffolding.
- Homes and buildings: supply and exhaust piping, water pipes and curtain rods.
About 6061 T4 Sheets & Coils
Nova Steel Corporation offers a wide array of Aluminium Steel Sheets & Coils, which is available at market leading prices along with customized sizes and shapes for our customers.6061 T4 Sheets & Coils are the most versatile of the heat treatable aluminium alloys. 6061 aluminium provides an extensive range of mechanical properties and corrosion resistance and can be fabricated by many of the commonly used. Our high-quality range of 6061 T4 Sheets & Coils are exclusively designed for steel factories, petrochemical industry, fire protection systems, chemical industries, shipping/shipment industries, etc
Aluminium Alloy Grades
- 2014 T6 Aluminium Round Bars Manufacturer
- 2024 T3 Aluminium Round Bars Manufacturer
- 2024 T3 Aluminium Sheets & Coils Manufacturer
- 2024 T351 Aluminium Plates Manufacturer
- 2024 T351 Aluminium Round Bars Manufacturer
- 2024 Aluminium Tubes Manufacturer
- 2124 T851 Aluminium Plates Manufacturer
- 6061 T4 Aluminium Sheets & Coils Manufacturer
- 6061 T6 Aluminium Round Bars Manufacturer
- 6061 T6 Aluminium Sheets & Coils Manufacturer
- 6061 T651 Aluminium Plates Manufacturer
- 6061 T651 Aluminium Round Bars Manufacturer
- 6061 T6511 Aluminium Flat Bar Manufacturer
- 6061 T6511 Aluminium Hexagon Bars Manufacturer
- 7075 T76 AluminiumSheets & Coils Manufacturer
- 7475 T7351 Aluminium Plates Manufacturer
- 7075 T7351 Aluminium Round Bars (Cold Finish) Manufacturer
- 7075 T7351 Aluminium Plates Manufacturer
- 6061 T6511 Aluminium Hollow Bars Manufacturer
- 6061 T6511 Aluminium Round Bars Manufacturer
- 6061 T6511 Aluminium Square Bars Manufacturer
- 6061 T652 Aluminium Plates Manufacturer
- 7050 T7451 Aluminium Plates Manufacturer
- 7075 73511 Aluminium Round Bars (Extruded) Manufacturer
- 7075 T651 Aluminium Round Bars (Extruded) Manufacturer
- 7075 T6 Aluminium Round Bars (Cold Finish) Manufacturer
- 7075 T6 Aluminium Sheets & Coils Manufacturer
- 7075 T6 Aluminium Round Bars (Extruded) Manufacturer
- 7075 T651 Aluminium Plates Manufacturer
- 7075 T651 Aluminium Flat Bars (Cold Finish) Manufacturer
- 7075 T651 Aluminium Round Bars (Cold Finish) Manufacturer
ADDITIONAL INFORMATION OF 6061 T4 SHEETS & COILS:
Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer), Other
Port of Dispatch: Mumbai OR KALAMBOLI India
Packaging Details: 6061 T4 Sheets & Coils are given marking, painted with black japan or black Board (Mat Finish) & will be packed in a bagging bag with stickers written with size, grade & quantity.
Manufacturer Supplier of 6061 T4 Sheets & Coils in India:
We, Nova Steel Corporation are Manufacturers of 6061 T4 Sheets & Coils in Mumbai, India. Our high-quality range of 6061 T4 Sheets & Coils is exclusively designed for chemical industries, steel factories, petrochemical industry, fire protection systems, shipping/shipment industries, etc. 6061 T4 Sheets & Coils are made with precision using the best quality raw material. We also customize 6061 T4 Sheets & Coils as per the customer’s requirements.
| Manufacturers Suppliers of 6061 T4 Sheets & Coils: | |||||
|---|---|---|---|---|---|
| Bengaluru | Mumbai | Chennai | Hyderabad | Kolkata | Pune |
| New Delhi | Ahmedabad | Jaipur | Surat | Salem | Gandhinagar |
| Bhiwandi | Tiruppur | Sivakasi | Jamnagar | Thiruvananthapuram | Rajahmundry |
| Bhubaneswar | Vijaywada | Firozabad | Bokaro Steel City | Rajkot | Bharuch |
| Panna | Raipur | Cochin | Ludhiana | Panipat | Durgapur |
| Peenya | Pimpri-Chinchwad | Channapatna | Kharagpur | Nashik | Bareilly |
| Varanasi | Haldia | Rourkela | Bangalore | Moradabad | Indore |
| Visakhapatnam | Trivandrum | Pithampur | Dibrugarh | Angul | Gwalior |
| Coimbatore | Kannur | Nagpur | Vadodara | Rudrapur | Noida |
| Agra | Bhagalpur | Jamshedpur | Bhilai | Lucknow | Kanpur |
| Thane | Bhopal | ||||
Manufacturer Exporter of 6061 T4 Sheets & Coils in International Markets:
Nova Steel India are Exporters of 6061 T4 Sheets & Coils in Saudi Arabia, Australia, Sri Lanka, Oman, Kuwait, Brazil, South Africa, United States, Venezuela, Singapore, United Kingdom, UAE, Qatar, Iran, Canada, Mexico, Nigeria, Malaysia, Turkey, and more than 80+ countries. We, Nova Steel India is one of the best Manufacturer Exporters of 6061 T4 Sheets & Coils.
| Manufacturer Exporter of 6061 T4 Sheets & Coils: | ||||
|---|---|---|---|---|
| Saudi Arabia | Oman | Kuwait | Netherlands | Iran |
| Bahrain | Qatar | UAE | Africa | China |
| Nigeria | Mexico | Canada | Venezuela | United Kingdom |
| United States | South Africa | Malaysia | Bangladesh | Turkey |
| Singapore | Sri Lanka | Australia | Brazil | |