Table of Contents

Aluminium Alloy 7050 Sheets & Plates Manufacturer, Supplier & Dealer in India

Nova Steel Corporation is one of the leading 7050 T7451 Plates Manufacturer, Supplier and Dealer in India. Nova Steel Corporation is a supplier of the broad range Aluminium Alloy 7050 Sheets and we additionally give our client the most satisfiable esteem list for Aluminum Alloy. 7050 T7451 Plates are being manufactured by using the finest grade of raw materials and cutting-edge techniques as per customer’s requirements, and are accessible to our valuable customers in a different range of diameters, wall thicknesses, and sizes at quite affordable rates.

Aluminium Alloy 7050 Sheets & Plates Grades & Specification

Grade: Aluminium Alloy 7050 (UNS A97050)
Width Range : 900-1500 mm
Type: Sheet, Plates, Coils, Flat, Strips, Profile, Blank, Circle, Ring, Chequered Plates, etc.
Thickness : 1/2″ – 6″ for 7xxx(stretched)
Length : 2000mm ~ 2500mm
Finish: Hot rolled plate (HR), Cold rolled sheet (CR)

Get In Touch

Aluminium Alloy 7050 Plates Chemical Composition

Grade	Element
	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti
7050	0.12	0.15	2.0/2.6	0.10	1.9/2.6	0.04	5.7/6.7	0.06

Aluminium Alloy 7050 Plates Mechanical Properties

Properties	Metric	Imperial
Tensile strength	515 MPa	74695 psi
Yield strength	455 MPa	65992 psi
Fatigue strength	240 MPa	34809 psi
Elastic modulus	70-80 GPa	10153-11603 ksi
Poisson’s ratio	0.33	0.33
Elongation	11%	11%

Aluminium Alloy 7050 Plates Physical Properties

Properties	Metric	Imperial
Density	2.6-2.8 g/cm³	0.0939-0.101 lb/in³
Melting point	494°C	920°F

Aluminium Alloy 7050 Plates Mechanical Properties

Metric	density (g/cm³)	x	T	x	W	x	L	=	weight
Example	2.80g/cm³	x	0.80mm	x	1.25m	x	2.5m	=	7.00 kg

Imperial	density (lbs/in³)	x	T	x	W	x	L	=	weight
Example	0.101 lbs/in³	x	0.063in	x	48in	x	144in	=	43.98 lbs

Size and Dimensions Chart Of Aluminium Alloy 7050 Plates:

Thickness	Size	Weight
mm	m	kg/sheet
0.30	2.5 x 1.25	2.63
0.40	2.5 x 1.25	3.50

0.50	2.5 x 1.25	4.38

0.60	2.5 x 1.25	5.25

0.80	2.5 x 1.25	7.00

1.00	2.5 x 1.25	8.75

1.20	2.5 x 1.25	10.50
1.27	2.5 x 1.25	11.11

1.60	2.5 x 1.25	14.00

2.00	2.5 x 1.25	17.50


2.50	2.5 x 1.25	21.88

3.00	2.5 x 1.25	26.25

4.00	2.5 x 1.25	35.00

5.00	2.5 x 1.25	43.75
6.00	2.5 x 1.25	52.50
6.35	2.5 x 1.25	55.56

Thickness	Size	Weight
in	ft	lbs/sheet
0.012	12 x 4	8.38
0.016	12 x 4	11.19
0.018	12 x 4	12.57

0.020	12 x 4	13.96

0.025	12 x 4	17.45

0.032	12 x 4	22.34

0.040	12 x 4	27.92

0.050	12 x 4	34.91
0.063	12 x 4	43.98

0.070	12 x 4	48.87

0.080	12 x 4	55.85
0.090	12 x 4	62.83

0.100	12 x 4	69.81

0.125	12 x 4	87.26

0.188	12 x 4	131.25


0.250	12 x 4	174.53

Alloy	g/cm3	lbs/in3
1200	2.71	0.098
2014	2.80	0.101
2017	2.79	0.101
2024	2.77	0.100
2124	2.77	0.100
2219	2.85	0.103
2524	2.78	0.100
2618	2.77	0.100
3003	2.73	0.099
3103	2.74	0.099
5056	2.63	0.095
5083	2.66	0.096
5086	2.66	0.096
5251	2.69	0.097
5754	2.67	0.097
6013	2.71	0.098
6056	2.72	0.098
6061	2.71	0.098
6082	2.71	0.098
7050	2.82	0.102
7075	2.80	0.101
7449	2.85	0.103
7475	2.80	0.101

7050 T7451 Plates Uses & Applications

7050 T7451 Plates are widely used all over the world in different industries. Here are the top uses of 7050 T7451 Platess-

Transporting materials: such as hot water, chemicals, oil, gas, and sulfur in various industries.
Automotive industry: air and water flow systems, and piping systems.
Sewerage systems: industrial water lines and water mains. Heating, ventilating and air-conditioning equipment.
Construction industries: structural applications and scaffolding.
Homes and buildings: supply and exhaust piping, water pipes and curtain rods.

About 7050 T7451 Plates

Aluminium Alloy 7050 Plates is mainly aluminum based, with copper and manganese being the other major chemical properties. Since it is less quench sensitive than most other aerospace alloys, this alloy maintains its strength properties in thicker sections while retaining good stress corrosion cracking resistance and fracture toughness levels. 7050 T7451 Plates exhibits better toughness/corrosion resistance characteristics than the older, more established alloy 7075. Since it is less quench sensitive than most other aerospace alloys, this alloy maintains its strength properties in thicker sections while retaining good stress corrosion cracking resistance and fracture toughness levels

Aluminium Alloy Grades

ADDITIONAL INFORMATION OF ALUMINIUM 7050 T7451 PLATES

Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer), Other
Port of Dispatch: Mumbai OR KALAMBOLI India
Packaging Details:7050 T7451 Plates are given marking, painted with black japan or black Board (Mat Finish) & will be packed in a bagging bag with stickers written with size, grade & quantity.

Manufacturer Supplier of 7050 T7451 Plates in India:

We, Nova Steel Corporation are Manufacturers of 7050 T7451 Plates in Mumbai, India. Our high-quality range of 7050 T7451 Plates is exclusively designed for chemical industries, steel factories, petrochemical industry, fire protection systems, shipping/shipment industries, etc. 7050 T7451 Platesare made with precision using the best quality raw material. We also customize 7050 T7451 Plates as per the customer’s requirements.

Manufacturers Suppliers of 7050 T7451 Plates:
Bengaluru	Mumbai	Chennai	Hyderabad	Kolkata	Pune
New Delhi	Ahmedabad	Jaipur	Surat	Salem	Gandhinagar
Bhiwandi	Tiruppur	Sivakasi	Jamnagar	Thiruvananthapuram	Rajahmundry
Bhubaneswar	Vijaywada	Firozabad	Bokaro Steel City	Rajkot	Bharuch
Panna	Raipur	Cochin	Ludhiana	Panipat	Durgapur
Peenya	Pimpri-Chinchwad	Channapatna	Kharagpur	Nashik	Bareilly
Varanasi	Haldia	Rourkela	Bangalore	Moradabad	Indore
Visakhapatnam	Trivandrum	Pithampur	Dibrugarh	Angul	Gwalior
Coimbatore	Kannur	Nagpur	Vadodara	Rudrapur	Noida
Agra	Bhagalpur	Jamshedpur	Bhilai	Lucknow	kanpur
Thane	Bhopal

Manufacturer Exporter of 7050 T7451 Plates in International Markets:

Nova Steel India are Exporters of 7050 T7451 Plates in Saudi Arabia, Australia, Sri Lanka, Oman, Kuwait, Brazil, South Africa, United States, Venezuela, Singapore, United Kingdom, UAE, Qatar, Iran, Canada, Mexico, Nigeria, Malaysia, Turkey, and more than 80+ countries. We, Nova Steel India are one of the best Manufacturer Exporters of 7050 T7451 Plates.

Manufacturer Exporter of 7050 T7451 Plates:
Saudi Arabia	Oman	Kuwait	Netherlands	Iran
Bahrain	Qatar	UAE	Africa	China
Nigeria	Mexico	Canada	Venezuela	United Kingdom
United States	South Africa	Malaysia	Bangladesh	Turkey
Singapore	Sri Lanka	Australia	Brazil